| Each module contains up to two singlepole
or double-pole switches or a
combination of these. |
| Max voltage |
250 V | 50-60 Hz |
| Resistive current |
16 A |
| Inductive current |
4 A |
| Lamp terminals |
(2,8x0,8) |
| Duty |
light |
| Contact clearance normal |
(>3 mm) |
| Activating force |
<17N |
| Max Ambient temp |
85°C max. |
| Dielectric strenght
between terminals
and support |
>4KV (1 min) |
| Insulation resistance
between terminals
and support |
>50Mohm |
| Contact bearing plastic
parts resistant
to Glow Wire test |
850°C |
| The product conforms with the European Standard EN 60335 (safetyof domestic appliances). |
| European(C.C.A.) Approval has been grated according to standard EN 61058. |
|
|
|
The 2905-C push button switch is made by a switch module, with (2 SPDT) @ 5mm distance between terminal, a frame and a shaft.
The type 2905-C push button switch can be also grouped up to 7 elements, with the possibility of interlocking various combinations.
The rapid acting switch offers low activating force with minimal shaft play and self cleaning contacts.
|
The main application is in the domestic
appliance industry.
|
Snap-in mounting onto control panel.
Electrical connections can be made
either using polarized connector blocks
or single tabs with relative insulation
covers.
|
Available in the following versions:
Independent: push once to activate,push again to releasr.
Push-button: push to activate, returns to rest position on release.
Interlocked: when a switch is activated,the previous one is automatically released. A safety device prevents two switches being activated togeter.
|
|
